Body Kit for GMC Vandura 1983

Thebody kit for the APlastics GMC Vandura 1983 (GMV) lets you customize your body shell with iconic styling elements from American builds of the 80s.

It includes abull bar, afront spoiler as well as awindshield deflector, giving it a more aggressive look and the retro style characteristic of custom vans from that era.

Designed specifically for the body shellAPlastics GMC Vandura 1983, this kit installs easily and perfectly completes your customization project.

• Brand: APlastics
• Type: body kit
• Designed for the 1983 GMC Vandura body
• Lets you customize the look of the body
• Styling inspired by American custom builds from the 80s

• 1 × bull bar
• 1 × spoiler
• 1 × windshield deflector

• APlastics GMC Vandura 1983 (GMV)

Making a body shell for a radio-controlled (RC) car can be an exciting project. It allows you to customize your vehicle to your taste. You will need some supplies and a little patience. Here is a step-by-step guide on how to make an RC body shell :

Materials needed :

1. Polycarbonate/Lexan RC body shell
2. Special polycarbonate spray paint TAMIYA or Createx airbrush paint available on the driftparadiz.fr website
3. Masking tape
4. Modeling scissors
5. Cloth and dish soap or body cleaner TAMIYA

Steps :

1. Preparation : Start by cleaning the polycarbonate body shell with a soft cloth and dish soap or Body cleaner TAMIYA to remove any oil or dirt. Let it dry or use a hair dryer, never use a cloth as it may leave residue inside the body shell.
2. Masking : Use the masking tape to cover the areas you do not want to paint right away. You will need to paint in layers, starting with the smallest and lightest details.
3. Painting : Remember that you are painting on the inside of the body shell, so the design must be done in reverse.Once you have finished masking, you can start painting. Make sure to shake the paint can properly before using it. Spray the paint in thin, even coats. Do not try to cover everything in one coat. It is better to apply several thin coats rather than one thick coat. After painting an area, remove the masking tape while the paint is still wet to avoid peeling the paint.
4. Drying and finishing : Let each coat of paint dry completely before applying the next coat. Once you have finished painting and the paint is completely dry, you can remove all the remaining masking. Then, you can cut out and mount the body shell on your RC car.

Remember that making an RC body shell requires patience and practice. Do not hesitate to experiment with different painting and design techniques to achieve the look you want.