Easy installation front FR-D7 kit

The Wrap-Up Next 0862-FD is a pack designed to make it easier to set up a basic front end setup on the FR-D7, using the values recommended by Wrap-Up Next.

The kit includes the ball ends, spacers and adjustment screws required to achieve a starting setup of approximately 195 mm width, 8° camber, 8° caster and slight toe-out.

This setup is based on the use of the standard knuckles from the RDX kit, 5.5 mm wheel hubs, and wheels with a +6 mm offset.

Turnbuckles are not included. They can be used separately to further fine-tune the various front end settings.

• Brand : Wrap-Up Next

• Reference : 0862-FD

• Type : front end setup pack

• Designed for FR-D7

• Basic setup recommended by Wrap-Up Next

• Overall width : approx. 195 mm

• Camber : approx. 8°

• Caster : approx. 8°

• Slight toe-out

• Allows you to quickly achieve a basic front-end setup

• Wrap-Up Next FR-D7

• Standard kit knuckles Rêve D RDX

• Wheel hubs : 5.5 mm

• Wheel offset : +6 mm

• 8 × ball ends size L

• 4 × ball ends size M

• 2 × 15 mm spacers

• 2 × 12 mm spacers

• 2 × 11 mm spacers

• 2 × 9.5 mm spacers

• 2 × 30 mm adjustment screws

• 4 × 25 mm adjustment screws

• 2 × 20 mm adjustment screws

• Turnbuckles

• RDX knuckles

• Wheel hubs

• Wheels

The values of 195 mm, 8° of camber and 8° of caster correspond to a reference setup recommended by Wrap-Up Next. The final values may vary depending on the parts used and the chassis settings.