Front Multi-Select 2.0 mm Knuckle (Base) for RDX

Componentbase of theMulti-Select aluminum front knuckle carrier forRDX, this2.0 mm offset model offers anoptimized reduction in scrub radius.

By shifting the bearing position2 mm inward, the steering axis moves closer to the center of the wheel, which improvessteering precision, reduces theload on the bearings and promotes betterfront rolling, even with large steering angles.

The knuckle carrier body uses atwo-piece design with aninterchangeable upper plate.

Depending on driving conditions, different plates (HIKARU, AKIRA, or US Type) can be installed to fine-tune the front end behavior.

• Offset of2.0 mm, perfect for RWD drift

• Optimizesresponsiveness at high angle

• Two-piecedesign (body + upper plate)

• Reduces load on thesteering bearings

• Compatible with plates:HIKARU / AKIRA / US Type (sold separately)

• 1 × Knuckle (left side)

• 1 × Knuckle (right side)

• 2 × M2 × 5 mm screws

• Top plate (required)

– D1-MK-PH: HIKARU

– D1-MK-PA: AKIRA

– D1-MK-PU: US Type

• Additional bearings, hex hubs, and hardware

This knuckle basecannot be used on its own. Installation absolutely requires acompatible upper plate, to be chosen according to your driving style or the desired geometry. Suitable forhigh angle / narrow scrub setups in RWD drift.