Toyota AE86 Levin L3 Body Shell

TheSD-AE86L3B fromYokomo is aToyota AE86 Levin body shell developed for1/10 RC drift.

ThisLevin version features thefixed-headlightfront end, characteristic of this iconic Japanese drift model. TheL3 variant brings a more aggressive style with a stronger drift-prepped look, ideal for creating anold-school JDMproject with a more striking presence on the track.

Thanks to its compact and balanced lines, the AE86 Levin remains a highly appreciated base for realistic builds, whether in street, circuit, or competition drift style. This body shell lets you create a setup that stays visually true to the spirit of Japanese builds from the 80s/90s.

• Width : 191mm

• Brand :Yokomo
• Reference :SD-AE86L3B
• Model :Toyota AE86 Levin L3
• Scale :1/10
• Material :clear polycarbonate
• Front endfixed-headlight Levin
• Styleold-school JDM / drift prepped
• Compatible with chassis1/10 RC drift
• Ideal base for a street drift or vintage competition project

• Clear polycarbonate body
• Sticker sheet
• Paint masks

• Paint, cutting and mounting accessories

👉 The main difference between the AE86 Yokomo versions :

• Toyota AE86 Levin (fixed headlights)
•Toyota AE86 Trueno (pop-up headlights)

Making a body shell for a radio-controlled car (RC) can be an exciting project. It lets you customize your vehicle to your taste. You will need some supplies and a bit of patience. Here is a step-by-step guide on how to make an RC body shell :

Materials needed :

1. Polycarbonate/lexan RC body shell
2. Polycarbonate-specific spray paint TAMIYA or Createx airbrush paint available on the driftparadiz.fr website
3. Masking tape
4. Modeling scissors
5. Cloth and dish soap or body cleaner TAMIYA

Steps :

1. Preparation : Start by cleaning the polycarbonate body shell with a soft cloth and dish soap or Body cleaner TAMIYA to remove any oil or dirt. Let it dry or use a hair dryer, never use a cloth as it may leave residue inside the body shell.
2. Masking : Use masking tape to cover the areas you do not want to paint right away. You will need to paint in layers, starting with the smallest and lightest details.
3. Painting : Remember that you are painting on the inside of the body shell, so the design must be done in reverse.Once you have finished masking, you can start painting. Make sure to shake the paint can properly before using it. Spray the paint in thin, even coats. Do not try to cover everything in a single coat. It is better to apply several thin coats rather than one thick coat. After painting an area, remove the masking tape while the paint is still wet to avoid tearing the paint.
4. Drying and finishing : Let each coat of paint dry completely before applying the next coat. Once you have finished painting and the paint is completely dry, you can remove all the remaining masking. Then, you can trim and mount the body shell on your RC car.

Keep in mind that making an RC body shell requires patience and practice. Do not hesitate to experiment with different painting and design techniques to get the look you want.