1/10 - RTR - Rc drift - Complete DRIFT PACKAGE Kit with Gyro V2 and Brushless System

- Variator and brushless engine with programming card (ESC BL-EP6 + Zero S 13.5T engine)
- fully adjustable
- Completely mounted
- painted bodywork
- the tools necessary for the interviews

• AA batteries (x4)
  Lipo battery, available here 
• You will need this adapator for the battery: Click here
• Charger, available here

• Insert 4 new batteries in the remote control
• Load the battery
• Connect the battery
• Light the remote control
• Light the drive
• Take advantage !!!
• To turn off the car, press the start button until the car extinction.
• 
  
• • Adjustment of steering stops:
• 
  
• • Light the transmitter
• • Press and hold the SET button by turning on the ESC power switch. Release the set button when the LED light begins to flash
• • The LED indicator flashes 5 times then remains on, indicating that you have entered the adjustment mode
• • The LED indicator flashes 3 times then remains on, this means that the neutral position has been set
• • Turn the transmitter wheel completely right and hold it down until the LED indicator flashes 3 times and then remains on. Now release the transmitter wheel, the St_R end point has been set.
• • Turn the transmitter wheel completely left and hold it down until the LED indicator flashes 3 times and then remains on. Now release the transmitter wheel, the St_L end point has been set.
• • The LED indicator flashes 3 times then remains on, this means that Canal 3 has been set.
• 
  
• 
  
• • Setting the gyroscope gain:
• 
  
• • Turn on the ESC emitting transmitter and power switch
• • Press the transmitter's CH3 button quickly (two short beeps will confirm that you have entered the adjustment mode)
• • Turn the transmitter wheel completely right and hold it for 8-9 seconds. Once in gaining the gain adjustment, the wheel will automatically return to the neutral position, then release the transmitter wheel. The current setting will appear in 1 to 2 seconds
• • Now adjust the gyroscope gain by turning the transmitter's wheel according to your needs, then quickly press the CH3 button to validate the setting (a short beep will confirm the validation).
• •
• 
  
• This refer to the notice in English provided for illustration images