B6 Nex AC/DC Charger (AC 50w

• The cable that goes from charger to battery is not included. You have to choose a cable with an XT60 socket for the charger side and a plug either DEAN or PK for the battery side depending on your battery. Available in the category: https://www.driftparadiz.fr/cat/electronique/cables-connectiques/cables-batterieschargeursservos/
• Based on the success of our legendary and iconic Imax B6, the SkyRC B6 NEX is a high performance solution designed for RC amateurs.
• Thanks to its double AC/DC input, the B6 NEX can load Li-ion or Lipo batteries from 1 to 6 elements with a maximum charging current of 10A. The integrated Bluetooth 5.0 allows the connectivity of the B6 NEX with smartphones. The application can send notifications, reminding users that the load or discharge is completed or that there is an update of the software. With the B6 Nex, recharge becomes a faster and more practical experience!
• Small by its size, large by its power
• Thanks to its light structure and optimized firmware, the B6 NEX can hold in your pocket. The maximum power of the B6 NEX can reach up to 200W.
• Superb screen goes - all at a glance
• The navigation in the menus is facilitated by the intuitive control interface with three buttons.
• Thanks to the amazing screen will backlit 2.4 inch, the wide viewing angle and the quick response, all the information is clear at a glance
• Advanced technology thanks to GAN
• By replacing silicon with gallium nitride, we were able to implement our exclusive load algorithm and our optimal thermal dissipation technique to reduce its size, minimize the increase in temperature and provide more power than ever! The load is child's play
• What is the gan?
• Gallium nitride (GAN) is a very hard, mechanically stable and wide-band semiconductor. The GAN is used in the production of semiconductor power devices as well as RF components and electroluminescent (LED) diodes. The GAN has demonstrated its ability to become the replacement technology for silicon semiconductors in power, RF and analog conversion applications
• The boom of the gan
• The main candidate to bring electronic performance to the next level and reactivate the positive impetus of Moore's law is Gallium nitride. The GAN's ability to drive electrons more than 1000 times more effectively than silicon, while being able to be manufactured at a lower cost than silicon, is now well established.
• Advantages of Gan chargers
• Small size, easy to transport, output at high wattage.
• Precise detection of the current and high yield
• Synchronous rectification (SR) uses mosfet with very low resistance to the passing state (Low Ron) to replace conventional rectification diodes and reduce rectification losses. It can considerably reduce the loss of recovery to the power output, thus increasing the effectiveness of the converter and minimizing the heating of the power supply
• Double AC/DC power input
• The B6 NEX is equipped with an AC and DC power input, which allows you to meet your feeding needs in different circumstances
• Versatile for most batteries

The charger comes with a load algorithm for the most common batteries:

Lipo

Li-ion

Lihv

Life

Nimh

Nicd

Pb

Adjustable cut -off voltage

You can adjust the loading voltage of the load according to your needs. In addition, the B6 NEX can memorize the latest adjustment parameters.

Smart and efficient cooling

The 12,000 rpm high -speed cooling fan at controlled temperature, effectively breathes air through the extruded aluminum thermal dissipator, which cools the device.

Bluetooth 5.0

A new generation of Bluetooth technology. A faster and more stable connection.

The B6 NEX incorporates a Bluetooth 5.0 chip, the data transmission rate of which is 2 times higher than that of Bluetooth 4.0, and the connection is faster and more stable.

Rapid notifications

When the load or discharge is complete, the application automatically sends a notification to remind the user that the process is complete. The user also receives a notification when there is an update of the software.

Scan to load

One of the unique features of the B6 NEX is the SCAN to Go (automatic load system): with the SkyCharge application, a sticker with a single QR code can be printed and glued to the battery. As all the essential information is stored in the QR code, just scan it for the load or discharge process to start automatically.

Android and iOS intuitive application

Thanks to the intelligent application, the charger can be quickly wirelessly upgraded. There is no need to buy an expensive data cable to upgrade the firmware via a computer. Everything is facilitated by the smartphone.

• Main characteristics
  
• Loads the batteries Life, Lion, Lipo, Lihv (1-6 elements), Nimh, Nicd (1-15 elements) and PB (100-50000MAH) on an AC or DC input.
• LCD display goes
• Balance 2-6 output, battery plug, AC and DC input
• Management of 11 languages ​​(simplified Chinese, traditional Chinese, English, Japanese, Spanish, Swedish, Polish, French, Czech, Italian, German, Norwegian Bokmal)
• Bluetooth connection 5.0
• Length
• 112mm
• Width
• 75mm
• Height
• 38mm
• Weight
• 237.7g
• DC entry
• 10-30V
• Load by DC
• 200W
• Discharge by DC
• 10W
• AC input
• 100-240V
• AC load
• 50W
• Discharge by AC
• 10W