SHIBATA GR86 body (2024 Spec)

The bodywork SHIBATA GR86 2024 Spec faithfully reproduces the famous GR86 prepared by SHIBATA, integrating the original aerodynamic elements of the brand for an aggressive and realistic style.

Built for platforms RC drifting and touring 1/10, this bodywork respects the proportions and design of the real model with a high level of detail.

The front bumper is molded as a separate part in order to obtain a more realistic rendering and a more precise finish.

Made in transparent polycarbonate, it comes with the necessary accessories to facilitate painting and assembly.

• Bodywork SHIBATA GR86 (2024 Spec)

• Scale 1/10

• Transparent polycarbonate to paint

• Front bumper separate room

• Width: 200 mm (front) / 195 mm (rear)

• Wheelbase: approx. 255mm

• Designed for RC drifting and touring

• Detailed reproduction with aero SHIBATA

• Transparent polycarbonate bodywork

• Separate front bumper

• Front and rear light buckets (polycarbonate)

• Rear half window (polycarbonate)

• Painting masks

• Product unpainted and uncut.

• The photos show a finished model as an example.

• Not included: Chassis, tires, wheels, mirrors, and spoilers.

Creating a body for a radio-controlled (RC) car can be an exciting project. It allows you to personalize your vehicle to your liking. You will need some supplies and a little patience. Here is a step-by-step guide on how to make an RC body:

Materials needed:

1. Polycarbonate/lexan RC body
2. Special polycarbonate spray paint TAMIYA or Createx Airbrush paint available on the driftparadiz.fr website
3. Masking tape
4. Modeling scissors
5. Cloth and dishwashing liquid or body cleaner TAMIYA

Steps:

1. Preparation : Start by cleaning the polycarbonate bodywork with a soft cloth and dishwashing liquid or Body cleaner TAMIYA to remove any oil or dirt. Leave to dry or use a hair dryer, never use a cloth as this risks leaving residue in the bodywork.
2. Masking : Use masking tape to cover areas you don't want to paint right away. You will need to paint in layers, starting with the smallest and lightest details.
3. Painting : Remember that you are painting inside the bodywork, so the design needs to be done upside down. Once you have finished masking, you can start painting. Be sure to shake the can of paint properly before using it. Spray the paint in thin, even coats. Don't try to cover everything in one coat. It is better to do several thin layers rather than one thick layer. After painting an area, remove the masking tape while the paint is still wet to avoid tearing the paint.
4. Drying and finishing : Allow each coat of paint to dry completely before applying the next coat. Once you have finished painting and the paint is completely dry, you can remove any remaining masking. Then you can cut and mount the body onto your RC car.

Remember that building an RC body requires patience and practice. Feel free to experiment with different painting and design techniques to achieve the look you want.