Receiver compatible with SANWA FH3/FH4T

• Compatibility : Works with radio control systems SANWA FH3/FH4T, including models M12, M11X, Exzes X, MT-4, Gemini X, MT-S, MT-4S, M12S and M17.

• Integrated antenna : Equipped with a professional patch antenna and a high quality amplifier, ensuring a high reception sensitivity in a reduced format.

• Bidirectional communication : Allows you to monitor the receiver's tension in real time via the transmitter.

• Extended tension range : Works with a voltage between 3.3V and 8.4V, compatible with batteries up to 2s Lipo, guaranteeing stability even in the case of sudden voltage drop.

• Compact and light format : With dimensions of 26 x 16.5 x 7.5 mm and a weight of 3.5 g, it is ideal for applications where space and weight are critical.

• Outings : Provides 4 PWM channels, with normal operating modes, SHR and SSR.

1. Light the transmitter and access the System menu to select the Bind option.

2. Connect the battery to the receiver while holding the F/S (set) button; The LED of the receiver flashes slowly. Hold the F/S button for 2 seconds, then release it; The LED continues to flash slowly.

3. In the transmitter menu, select the Bind option and press Enter while the LED of the receiver flashes slowly. The LED turns off immediately.

4. Press Entry on the transmitter again; The receiver's LED becomes fixed, indicating that pairing is successful.

5. In the event of failure, repeat the above procedure.

• Fixed blue LED : Signal received correctly.

• Flashing blue LED : Active pairing mode.

• Extinguished LED : No signal received.

Futaba 10PX 7PX 4PX 7XC 4GRS 4PV 4PM 4PLS High -speed bidirectional receiver transmitter