2800mAh LiPo battery for radio

This battery contains a charger/balancer and feeds directly by the jack on the models: 8J, 10J, 14SG, 16SZ, 6K 4PLS, 4PKS, 4GRS, 4PM, 7PX and 10PX with 220V/500MAH food Ref. 330025010

To load with a standard lipo charger, adjust your charger on Lipo 7.4V, maximum 1 amp and in "load" mode, do not put in balance otherwise it will not work. The balancer is incorporated into the battery, you will therefore have many balanced cells.
If your charger refuses the load in lipo mode, the manufacturer gives you a tip: put your charger in Nimh 8S 8.4V mode and launch your load at 1.0A and your battery will cut the load automatically

Safety instructions for the use and storage of Lipo / Li-ion batteries

✅ Before the load

• Always let cool The battery before being loaded.

• IMPORTANT : If your car lack of power, Stop immediately And let the battery cool. A battery Lipo or li-ion too asked can go down under 3.3V per cell, which will make her definitely unusable.

• After the load, leave the battery cool before installing it in your vehicle.

⚠️ Precautions during the load

• Never leave The battery connected to the charger for hours or all night.

• Never plug in The battery on the vehicle while it is in charge.

• Never leave an unattended accusation.

☀️ Storage and transport of Lipo batteries

• Store your batteries in a ventilated, fresh and dry place, with a temperature between 5 ° C and 27 ° C.

• Storage load : The batteries must be stored at About 3.8V per cell. Most modern chargers have a function “Storage” allowing to reach this voltage.

• Transportation : Maintain an ambient temperature of 5 ° C at 50 ° C, away from the sun.

❌ Guarantee

Batteries are never taken in warranty by manufacturers, whatever the brand. Their lifespan depends entirely on their use and maintenance.