LIPO battery 7.4V 4000MAH 50C DEAN - Absima - 4140008

• Main connector : T-Plug (Deans type, very common in the Drift)

• Power cables : High temperature silicone 12 AWG - Length 100 mm

• Balancing : JST-XH 2S

• Balancing cable : silicone 24 AWG

• Length : 138 mm

• Width : 47 mm

• Height : 25 mm

• Weight : ≈ 235 g

• This battery is perfectly suited for RC 1/10 Drift or Touring cars with standard location.

• THE rigid housing Guarantees excellent protection against side shocks on track.

• Compulsory lipo charger with balancing function.

• Remember to store your lipo at 50% load to extend its lifespan.

Safety instructions for the use and storage of Lipo / Li-ion batteries

✅ Before the load

• Always let cool The battery before being loaded.

• IMPORTANT : If your car lack of power, Stop immediately And let the battery cool. A battery Lipo or li-ion too asked can go down under 3.3V per cell, which will make her definitely unusable.

• After the load, leave the battery cool before installing it in your vehicle.

⚠️ Precautions during the load

• Never leave The battery connected to the charger for hours or all night.

• Never plug in The battery on the vehicle while it is in charge.

• Never leave an unattended accusation.

☀️ Storage and transport of Lipo batteries

• Store your batteries in a ventilated, fresh and dry place, with a temperature between 5 ° C and 27 ° C.

• Storage load : The batteries must be stored at About 3.8V per cell. Most modern chargers have a function “Storage” allowing to reach this voltage.

• Transportation : Maintain an ambient temperature of 5 ° C at 50 ° C, away from the sun.

❌ Guarantee

Batteries are never taken in warranty by manufacturers, whatever the brand. Their lifespan depends entirely on their use and maintenance.