LiPo battery for sanwa 4000mAh 1S 3.7V - Example : Sanwa MT-5/M17

• Product reference : GNB40001S5R
• Ability : 4000mAh
• Nominal voltage : 3.7V (1S)
• Configuration : 1S1P
• Dimensions : 12 × 40 × 66 mm (height x width x length)
• Weight : 63 g ± 2 g
• Discharge rate : 5C
• Recommended load rate : 0.2c to 1c
• Discharge connector : JR

• Compatible Sanwa MT-17
• Suitable for others radios, transmitters or receivers (Tx/rx) if the format and the JR connector correspond
• Perfect for pilots looking for a great autonomy without weighing down their radio

• 1x GNB Lipo 4000mAh 1S 3.7V battery - JR connector

Safety instructions for the use and storage of Lipo / Li-ion batteries

✅ Before the load

• Always let cool The battery before being loaded.

• IMPORTANT : If your car lack of power, Stop immediately And let the battery cool. A battery Lipo or li-ion too asked can go down under 3.3V per cell, which will make her definitely unusable.

• After the load, leave the battery cool before installing it in your vehicle.

⚠️ Precautions during the load

• Never leave The battery connected to the charger for hours or all night.

• Never plug in The battery on the vehicle while it is in charge.

• Never leave an unattended accusation.

☀️ Storage and transport of Lipo batteries

• Store your batteries in a ventilated, fresh and dry place, with a temperature between 5 ° C and 27 ° C.

• Storage load : The batteries must be stored at About 3.8V per cell. Most modern chargers have a function “Storage” allowing to reach this voltage.

• Transportation : Maintain an ambient temperature of 5 ° C at 50 ° C, away from the sun.

❌ Guarantee

Batteries are never taken in warranty by manufacturers, whatever the brand. Their lifespan depends entirely on their use and maintenance.