ONE DROP KANDY - Grape

Finally a candy for beginners in aerographer

One Drop Kandy is pre-lined up with pearls, so there is no need to apply a silver basic color as for the usual Kandy. In addition, it is a high concentration mixture of light and very transparent kandy colors and shiny mica which has a beautiful radiance, allowing to create bright colors even with a small layer of paint. It is a Kandy color that gives a deep color finish. Usually based on metallic, it is a Kandy color that reveals the depth by repeating the number of layers, but use a white basic color for a bright tone or a black basic color for a chic and dark tone. The peculiarity is that the color kandy develops deep and beautiful even when it is superimposed on it. 50g / bottle.

Polyurethane paint:

Use this paint in an airy place and with a mask

Precautions:

1. In case of discomfort or discomfort when using the product, consult a doctor immediately.
2. In case of contact with the eyes, rinse them abundantly with water.
3. If irritation persists, request medical assistance.
4. For your protection, wear suitable equipment such as Masks, gloves and glasses, and avoid prolonged exposure to vapors.
5. Store the product in a cool place to reduce the risk of fire.
6. Do not leave the children's door
7. Do not ingest, in case of ingestion do not have vomit and contacted an anti-poison center
8. Do not use close to a flame: flammable liquid

The images are used for illustration purposes only.
Product specifications can be modified without notice for reasons of improvement or other.

• Dilution: to be diluted at around 150-200% with the Dilution
• Apply it BINDER PC as a hook support before painting on the body.
• After the One Drop Kandy, apply the mirror gray To fix the color.
• Then apply white For a clear rendering or Black For a dark color rendering.

Paintings are only shipped to the following countries:

• Germany
• Austria
• Belgium
• Bulgaria
• Croatia
• Denmark
• Spain
• Estonia
• Finland
• Hungary
• Italy
• Latvia
• Lithuania
• Luxembourg
• Norway
• Netherlands
• Poland
• Portugal
• Czech Republic
• Romania
• Serbia
• Slovakia
• Slovenia
• Sweden
• Switzerland

Recommended pressure according to the needle diameter:

• 0.3 mm needle:

• 0.08 to 0.12 MPa (0.8 to 1.2 bar / 11.6 to 17.4 psi)

• 0.5 mm needle:

• 0.15 to 0.18 MPa (1.5 to 1.8 bar / 21.7 to 26.1 psi)

Uniform spray on large surface (0.5 mm flat nozzle):

• 0.2 to 0.23 MPa (2.0 to 2.3 bar / 29 to 33.4 psi)

Relevant note:

These values ​​may vary depending on type and viscosity of the paint used. Do preliminary tests to precisely adjust your pressure to get an optimal finish.

Click here to find out who is Show UP