10PX Transmitter – Super Responsive Digital Proportional RC System
10PX Features
• Color LCD touch screen : 4.3-inch HVGA backlit touchscreen LCD, visible indoors and outdoors thanks to its trans-reflective nature.
• F-4G system and telemetry : Equipped with the F-4G system which allows telemetry with faster response than the T-FHSS SR system.
• 10 channels : Up to 10 channels can be used together thanks to the S.BUS2 system.
• T-FHSS MINIZ system : Allows the use of the dedicated Kyosho Mini-Z Evo RA-42 receiver (purchase separately).
• Software update : Can be updated via microSD card. Model data and telemetry logs can also be saved to a microSD card.
• Model memory for 40 models : Model names can use up to 15 letters, numbers and symbols. The model copy function allows you to create a model memory with different settings.
• Various switches : Features a paddle switch near the wheel, a 3-way switch on the handle and a switch at the bottom to support multiple channels and functions.
• LiPo battery : Lipo and Life compatible
• Spring kit available on the Driftparadiz website
Mixing and adjustment functions:
• Brake mix : Independent adjustment of front and rear brakes of large cars (1/5GP, etc.).
• Direction mixing : Enables smoother turns by independently adjusting the left and right steering servos.
• 4WS mixing for crawlers : For vehicles with four-wheel steering.
• Dual mixing ESCs for crawlers : Independent control of front and rear ESC.
• Gyro mixing : Adjusting the sensitivity of car gyroscopes Futaba.
• Mixing for tanks : Function intended for tank type vehicles.
• CPS Mixing : Control of LEDs and flashing via the CPS-1 channel power switch.
• S.BUS servo : Allows adjustment of S.BUS servo parameters via PC Link software.
• MC-Link : Adjusting speed controllers Futaba via Link software.
• Throttle speed : Adjusts throttle speed to prevent tires from spinning on slippery surfaces.
• Steering speed : Reduces the operating speed of the steering servo if necessary.
• Non-telemetric LED : Indicates that the telemetry function is disabled.
• Dial selection function : Allows you to assign functions to the dials and adjust the amount and direction of operation.
• Switch selection function : Allows you to assign functions to 10 switches and adjust the direction of operation.
• Wheel and trigger position : Adjustable using the APA wheel position adapter.
• Rubber handle : Convertible to narrow handle type by changing the rubber handle.
• Trim/Dial Lock Functions : Prevents adjustments and operation by trim and transmitter dials.
• Left-handed support : The installation direction of the wheel can be reversed.
• Vibrator integrated into the handle : Works as a race timer, end of time alert and telemetry alarm.
• USB port : Can be used as a game controller by connecting it to a computer via USB cable.
Contents of the 10PX Box
• T10PX transmitter
• R404SBS or R404SBS-E receiver
• Dry Battery Holder
• Wheel Offset Adapter (APA) and mounting screws
• 32 degree wheel adapter
• Wheel angle wedge 5 degrees
• Large steering wheel
• Trigger guard (Lx1/Rx1)
• Rubber handle x1
• Blind Palette x2
• Hex key
• Short manual
10PX Transmitter Specifications
• Wheel system, 10 channels (F-4G system), 4 channels with TFHSS-SR, T-FHSS system
• Transmission frequencies : 2.4 GHz band, transmit RF output power: 100mW EIRP
• Protocols : T-FHSS-SR/T-FHSS/S-FHSS/F-4G
• Food : LiPo – NLF2F2000B (7.4 V), LiFe – FT2F1700BV2 (6.6 V)
• Current consumption : 350 mA or less (when T-FHSS, vibration off, backlight on)
• transmitting antenna : 1/2λ dipole
• 4.3-inch backlit color touchscreen : *When you turn on your 10PX, bright spots may appear on your screen. Your screen contains a very large number of TFTs and is manufactured with high precision technology. Bright spots that may appear are inherent to TFT manufacturing technology.
Receiver Specifications
R404SBS-E
• System : F-4G
• Size : 25.5×20.7×10.6 mm
• Weight : 5.7g
• Operating voltage :DC 3.7-7.4V
