Toyota GR86 Naoki Nakamura Street Ver. Body

The body shell features bumpers or other separate elements for higher-quality molding and to avoid mold marks, unlike one-piece body shells molded with 3-part molds. For assembly, you simply need to glue these parts on after painting using body shell glue available on our site.

• Brand:Addiction

• Reference:AD-RB17

• Model:Toyota GR86 Naoki Nakamura Street Ver.

• Scale:1/10

• Wheelbase:257 mm

• Width:

• Front:190 mm (198 mm with overfender)

• Rear:197 mm

• Polycarbonate bodyunpainted

• Design based onreal 3D scan

• Complete body kit (aggressive street look)

1. • Level of detailultra-realistic

• Clear polycarbonate body

• Body kit (splitter, overfenders, etc.)

• Wing

• Light buckets

• DecalsRealistic 3D

• Product underofficial license

• Paint, cutting and mounting accessories

👉 This body shell is clearly aimed athigh-end builds :

• requires precise assembly (multi-piece)

• ideal forextreme scale / D1-style competition projects

• exceptional visual result once finished

⚙️ With its specific widths, it requires aprecise offset setup to achieve perfect fitment.

Creating a body shell for a radio-controlled (RC) car can be an exciting project. It allows you to customize your vehicle to your taste. You will need some supplies and a bit of patience. Here is a step-by-step guide on how to make an RC body shell:

Materials needed:

1. Polycarbonate/Lexan RC body shell
2. Special polycarbonate spray paint TAMIYA or Createx airbrush paint available on driftparadiz.fr
3. Masking tape
4. Modeling scissors
5. Cloth and dish soap or body cleaner TAMIYA

Steps:

1. Preparation : Start by cleaning the polycarbonate body shell with a soft cloth and dish soap or Body cleaner TAMIYA to remove any oil or dirt. Let it dry or use a hair dryer, never use a cloth as it may leave residue inside the body shell.
2. Masking : Use the masking tape to cover the areas you do not want to paint right away. You will need to paint in layers, starting with the smallest and lightest details.
3. Painting : Keep in mind that you are painting on the inside of the body shell, so the design must be done in reverse. Once you have finished masking, you can start painting. Make sure to shake the paint can properly before using it. Spray the paint in thin, even coats. Do not try to cover everything in a single coat. It is better to apply several thin coats rather than one thick coat. After painting an area, remove the masking tape while the paint is still wet to avoid peeling the paint.
4. Drying and finishing : Let each coat of paint dry completely before applying the next coat. Once you have finished painting and the paint is completely dry, you can remove any remaining masking. Then, you can cut out and mount the body shell on your RC car.

Keep in mind that making an RC body shell requires patience and practice. Do not hesitate to experiment with different painting and design techniques to achieve the look you want.